Estoprime LV

We combine Japanese innovation and formulation expertise with local industry experience to deliver durable, high-performance solutions that reinforce modern infrastructure.

Estoprime LV

Estoprime LV

Estoprime LV is a two component, low viscosity, solvent free epoxy primer. It is suitable for dense substrates where maximum primer penetration is required.

Compare Your Products Here
Main Category
Sub-category
Floorings
>
Epoxy Floorings

Overview

Estoprime LV is a two component, low viscosity, solvent free epoxy primer. It is suitable for dense substrates where maximum primer penetration is required.

Application

Estoprime LV is the recommended primers for the Estogard range of epoxy resin high build coatings, toppings and screeds. The primers "wet out", form a film, seal the substrate and promote adhesion. The choice of priming system depends on the end use of the floor and particular site conditions.

  • Excellent adhesion to concrete, cementitious screeds and subsequent epoxy overlay
  • Good bonding on metal surface.
  • Easy to use - simple roller application
  • Low viscosity ensures maximum primer penetration

Benefit & Feature

Limitation
Estoprime LV should not be applied onto surfaces known to, or likely to suffer from rising damp conditions or have a relative humidity greater than 75% as measured in accordance with BS8203 Appendix A or by a Vaisala thermo-hygrometer type HMI 31. The products should not be used below 10°C.

Physical Properties/Technical Info

Pot life @ 30 °C, min30 – 60

Product Info

Packing & Size
  • 5 Liter pack
Shelf Life
All products have a shelf life of 12 months in unopened packs.
Product Handling
Contact with the skin must be avoided. Gloves and barrier cream should be used when handling these products. If contact with the resin occurs, the skin should be washed immediately with soap and water. Eye contamination must be immediately washed with copious quantities of water and medical treatment sought.
Storage Condition/Temperature
Kept in a dry store in the original. Store in dry conditions between 5°C and 30°C, away from surfaces of heat and naked flames, in unopened packs

Related Products

Estogard CS10e

Estogard CS10e

Estogard S100e

Estogard S100e

Estogard T500e

Estogard T500e

logo